1. Mac Pro 1 1 Upgrade
2. Mac Pro 2 1 Software Upgrade Free

Community member Julius Chan has sent us this handy guide to getting a 2006 Mac Pro to run the lastest Mac OS X Yosemite.

Here is his helpful guide.

Oct 30, 2017  This video is an outline on how to flash a Mac Pro 4,1 to a 5,1 which will allow you to upgrade the CPUs, Faster RAM and run MacOS High Sierra. Basically breathes new. The 1TB SSD Kit for Mac Pro enables you to upgrade the internal SSD storage capacity of your Mac Pro. This kit, containing two 512GB modules, replaces the current SSD. 1) Upgrade the firmware to Mac Pro 2,1 (add support for newer CPUs) There is a useful forum here: which has a utility to do this. I followed the instructions and rebooted with the long tone and off you trot! This is needed to add support for the newer CPUs we had in store. 2) Upgrade the CPUs to 2. May 07, 2019  GPU Upgrades. Yes, the Mac Pro's GPUs can be swapped out, but only three different GPUs were ever produced for it, the AMD FirePro D300 2 GB, D500 3 GB, or D700 6 GB. Apple has kept tight control on these (any official repairs require the GPUs to be returned to Apple), and thus few-to-none exist on the aftermarket, and the two higher GPUs are prone to failures thanks to a wattage ceiling.

Oct 25, 2009  I been using Mac pro 1.1 for almost 3 years. Dual core 2.66 I would like to upgrade the CPU to Quad core (either 3.0Ghz - x5356 or 2.66Ghz -x5355) and the graphic card to ATI HD4870. Do you think it would be a problem if I upgrade the CPU and the graphic card together? I mainly using photoshop, not video editing at all. Jun 08, 2019  This firmware tool have a few mistakes (extractandpatchefifiles.sh) on macOS 10.6 and 10.7, but works well on macOS 10.11 El Capitan, it is easy to upgrade your macpro1.1 to new system of 10.11, only the 12gb memory needed for the installation, then you can update the firmware to 2.1.

Disclaimer

First of all, all of the below are regarded as hacks. If you end up with bricked Mac Pro, then it’s your own silly fault. None of this stuff is qualified. You’re building what I refer to as a “Frankenmac”.

History

Part of my day job is building Pro Tools rigs for high-end customers. They can afford the best, so I get to tinker with the latest Avid qualified hardware and software available: “iAshtray” Mac Pros, tank-like rack mounted Sonnet chassis, HDX or HD Native cards etc. All fully qualified, just the way I like it.

This is all jolly nice for my clients, but my own personal 2006 Mac Pro 1,1 with a Cinema display (purchased from a friend for a pittance) sits there languishing quite a few operating systems behind on OSX Lion 10.7.5 running Pro Tools 10.3.10 HD. Bugger…

I’d read that some very clever folk had managed to persuade an old Mac Pro to run Mountain Lion and then Mavericks, and searching the Interwebs, I did indeed find a number of solutions that seemed to require entering a lot of commands in Terminal, creating boot partitions and generally patting your head and chewing gum at the same time. So I decided to wait a wee while until I found a more elegant solution. The wait seems to have been worth it, as I now have my poor old machine running on OSX Yosemite 10.10.2 and Pro Tools 11.3.1

The main restriction for a 2006/7 Mac Pro is that it was designed to boot into a 32-bit environment, even though a lot of the internal hardware was 64-bit capable. The clever bunnies out there in the Wild World Webby, have managed to fool a Ye Olde Mac Pro to run in 64 bit EFI.

Things that you will need:

1. A Mac Pro 1,1 or 2,1 Cheese grater desktop with OSX Lion 10.7.5 system drive
2. 8GB USB drive
3. A graphics card better than a GT120, I used a Radeon HD 5770, original mac version with its appropriate power cable. There are flashed PC cards out there, but they won’t display a boot screen. I like a boot screen, so I purchased a proper Apple card (2nd hand)
4. We are sorry but the pre patched version of OSX Yosemite 10.10 is no longer available. It would appear that Apple have asked for it to be taken down.
5. Either boot.efi file downloadable here. Black is a white Apple on a black background and Grey is the traditional Apple boot screen:
6. Black: Sorry no longer available
7. Grey: Sorry no longer available
8. I chose the black screen as I dual boot into OSX Lion 10.8.5 or Yosemite 10.10.2. The black screen tells me instantly that I’m booting into Yosemite.
9. A spare hard drive, mechanical or SSD for the new system drive. You could partition your old Lion drive, but I prefer to build on drive that’s minty fresh. If I stuff anything up, I can always boot back to my untouched Lion system drive. Contingency plan…
10. A download of Yosemite 10.10.1 or 10.10.2 Combo updaters http://support.apple.com/kb/dl1786?locale=en_US
11. A download of Diskmaker X http://liondiskmaker.com/

Mac Pro 1 1 Upgrade

All of the above cost me around $200 US, I had a spare 1TB 7200 rpm SATA drive, USB drives are cheap and seem to breed like rabbits. They also seem to disappear down the black hole that guitar picks, iLok 2 lids and single socks end up.

Preparation

I’m going to assume that you’re booting from your old Lion system drive, so go ahead and download all the bits and bobs from the links above. Depending on your internet speed, this may take some time, so make a nice pot of tea. If you’re in Australia, as I am, you have plenty of time to make a nice batch of scones with jam and cream, thanks to our advanced network infrastructure.

Once you’ve finished downloading, place the files somewhere safe, it could be on a USB drive etc

I popped the files on one of my media drives temporarily so I could access them from my old system drive or my new system drive. (yet to be created, mwahhahaha)

Hardware Installation

Open up your Mac Pro, take the nasty GT120 graphics card out and pop in the ATI Radeon 5770. This card takes its power from the motherboard, so make sure you’ve got the correct power cable.

https://www.youtube.com/watch?v=NUh0uvUHn68

Install your new system drive, but leave the Lion drive in for the moment. I usually put new, unformatted drives in bay 4… Just so I know…

Reboot your rig into OSX Lion and make sure the new graphics card is AOK. You could format your new system drive at this stage as well. Call it something like “Yosemite HD” or “Kevin” if you wish.

Double and triple check that you’re formatting the correct drive… (Doh) Bay 4, remember??

Software Installation

Open up Lion Diskmaker X and follow the instructions to create a bootable USB “special” Yosemite installer from the big Yosemite image you download before. This is the patched version of Yosemite.

Don’t install the Apple App store version as this does not have ze patch…

Mac Pro 2 1 Software Upgrade Free

This can take some time, so be patient and do something useful for the planet, like knitting a vest for our wee penguins on Phillip Island.

• Install Yosemite from USB drive to your new “Yosemite HD” system drive. Bay 4, remember?? Hold down the Mac option key to choose your boot drive after start up chime.
• Install the boot.efi patch, I used the black version. Restart the mac, hold down the mac option key to choose your boot drive after start up chime You should now be able to boot into either OSX Lion or Yosemite 10.10 flat. Woo Hoo!
• Install either OSX 10.10.1 or 10.10.2 Combo updater

You’re done. I then optimise OSX Yosemite for Pro Tools, turning off mission control, notifications, silly kitten desktop pictures etc.

More Hardware Options

This not a job for the faint-hearted, but it’s still pretty easy to do if you like to get your hands dirty.

I replaced the old processors (dual cores) with SLAED Xeon 5355’s. EBay again, cost $80 US each.

https://luckyportland.netlify.app/mac-router-has-been-hacked.html. Oct 23, 2019  Signs your router’s been hacked. Your router is responsible for managing the connection between your internet-connected devices and your home Wi-Fi.Once your router has been successfully hacked, the third-party can carry out a number of malicious activities including identity theft, malware attacks and website reroutes.

This mod doubles the amount of processor cores giving a significant speed bump.

Videos here:

Conclusion

I now have the choice to boot into OSX Lion 10.7.5 with PT10.3.10 HD OR boot into OSX Yosemite 10.10.2 with PT11.3.1. As an added bonus, my processor cores have gone from 4 to 8 at 3GHz.The new graphics card no longer struggles like the old GT120 did.

Both the software and hardware changes, including the processor upgrades were done comfortably in an afternoon. Download times were about 7 days with our advanced Australian Internet speeds.

The main reason why I wanted PT11.x running was for the video engine and faster than real-time bounce as I have recently completed a filum project that required a whole bunch of stems.

I used PT10HD for the editing and mixing, then bumped over to PT11.3.1 for stem creation.

Next thing to do for the ye olde Mac is to find some more RAM and change the Yosemite system drive to an SSD. It seems that I should be able to get quite a few more years of life from a machine that officially could not run a 64 bit OS or applications. For a machine from 2006, this is pretty cool and I’ve managed to spend under $400 US to achieve it.

Good apps to have on your mac. You can learn the colors of the rainbow or the Pythagorean Theorem.

Thanks

Don’t forget to offer up some shekels for the shareware products.